why is my generac quietpact generator clicking but not firing up

Question

Accepted Answer

### [Step 1] TEST 28: Check Fuel Supply
Verify the LP gas supply is adequate. Ensure the system is a vapor withdrawal type, as liquid withdrawal is prohibited. The primary regulator must provide gaseous fuel to the secondary regulator at a recommended **11 inches water column** (maximum **14 inches water column**). The minimum gas flow rate required is **67 cubic feet per hour**.
*   **Results:** If pressure/supply is low, replenish fuel. If fuel supply is confirmed good, proceed to **Test 29**. (Page 50)

### [Step 2] TEST 29: Check Wire 14 Power Supply
The Engine Controller must deliver batt

Generac QuietPact 40G/40LP Repair Guide

Why is my generac quietpact generator clicking but not firing up

Service Manual Source Pages

Related Questions